2020-3-11
Stainless Steel Faucets Manufacturers Share Faucet Replacement Precautions
In life, it is inevitable that the plastic spool inside the Stainless Steel Faucets will be broken. In the face of such a situation, the manufacturer of the Stainless Steel Faucets will share the knowledge of correct faucet replacement:
Replacement steps:
1. Preparation: The valve core is broken. We must buy one to replace. The new valve core must be matched with your faucet. In general, you can basically buy any type of faucet when you buy a spool in this brand of store. Prepare a slotted or Phillips screwdriver or an Allen wrench according to the screws of your own faucet, and then prepare a sharp-nose pliers and a small knife.
2. Remove the hot and cold water button: Before replacing the valve core, first find the water source switch of this faucet, and then turn it off to avoid spraying water during replacement. Then find the cold water button or plastic cap, and gently pry it down with a small blade so that you can see the screws inside.
3. Remove the handle: After opening the hot and cold water button, look at the shape of the screw, whether it is a flat or cross-shaped, or a hexagonal screw, and then decide which screwdriver or hexagonal wrench to use. Remove the screw in the hole with a screwdriver, and then you can remove the handle of the faucet.
4. Unloading the valve core: After removing the handle, you can see the valve core inside. Some valve cores also have a fixed shell cover on the outside. You can just remove the cover. Then you can see the clip that fixes the spool. Generally there are four claws on the clip. Use two sides of the needle-nose pliers to clamp the two claws, and then turn clockwise to remove the clip.
5. Installation: After removing the clamps, you can remove the broken valve core, then install the new valve core, reverse the previous steps, reinstall the other components, and install the faucet handle. After going up, check the water source valve to see if it leaks. After that, lock the handle tightly and install the hot and cold plastic caps.
information about Stainless Steel Faucets : https://www.afastainlesskb.com/product/stainless-steel-faucets/
2 Common Choices Of Faucet: Chrome Vs Stainless Steel Faucets
One of the choices you need to make when buying a new kitchen faucet is the type of finish. Chrome and stainless steel are two common choices. They are bright, durable and require relatively low maintenance. Every metal can be used in almost any design. However, they do have some key differences and advantages. Therefore, in this article, we will study the comparison of chromium with stainless steel faucets.
stainless steel
Unlike chromium, stainless steel is an alloy of steel and at least 10.5% chromium. The material is polished and sanded to give it a mirror-like appearance without any scratches or pinholes. It gives the faucet a good gloss and an overall beautiful appearance.
Compared to chromium, stainless steel is more durable. It does not sink easily even when used in large quantities. It can withstand the impact of high-speed water and does not wear. The service life of stainless steel faucets can exceed 10 years.
If the faucet is also covered with a thick chromium oxide layer, the stainless steel surface also has excellent corrosion resistance. It does not rust and corrode like other metals.
Stainless steel also better masks water spots and finger stains while maintaining its glossy appearance. This makes it easy to maintain such a faucet. You just need to dry the surface of the faucet regularly with a soft cloth.
However, they do not scratch and speck. To prevent the formation of water spots, you can wipe the faucet with a soft cloth every time you wet it. If your kitchen faucets are already spotted, you can remove them with the help of white vinegar. Stainless steel faucets are also easily scratched. One way to avoid them is to avoid any rough cleaning products and brushes. Use only a soft cloth to clean its surface.
Stainless steel faucets also have good high temperature and low temperature resistance. It resists scaling and shows exceptional toughness at very high temperatures.
There are various stainless steel kitchen and bathroom faucets. Most of them are cheaper than chrome-plated fixtures.
advantage
more durable.
Excellent corrosion resistance.
High and low temperature resistance.
Compared with chromium, it requires less maintenance.
Available in multiple models.
Lower costs.
Disadvantage
Easy to scratch.
Water spots and fingerprints leave visible marks.
chromium
When people talk about chrome faucets, it doesn't mean that the fixture is made of pure chrome. Chrome faucets can be made of steel, brass, plastic or stainless steel. Chromium is a coating applied to the base material using an electroplating process.
Chrome kitchen faucets are often chosen because they have a higher gloss and are even brighter than stainless steel. It makes the fixture an eye-catching part of the kitchen decoration.
Chrome-plated faucets are also available in satin and brushed chrome. The appearance of these faucets is more matte.
On the one hand, a bright sheen contributes to the aesthetics of the faucet, but on the other hand, keeping the faucet clean is more challenging. Water stains and fingerprints left on the luminaire are still very visible, in contrast to the chrome gloss. The chrome-plated polished surface is also easily scratched. However, by regularly cleaning and using non-abrasive cleaning products, the faucet retains its shine.
Like stainless steel, chromium has good corrosion resistance.
Almost all faucets, including bathroom and kitchen faucets, are available in chrome. So you can choose more styles. Also, chromium is a popular choice for other fixtures in the house, so it's easy to match them with new faucets.
advantage
Shiny finish.
Modern look faucet.
Disadvantage
More maintenance is needed to maintain its shiny appearance.
Easy to scratch.
Show fingerprints and dirt.
The choice of chromium or stainless steel ultimately depends on the buyer and his preferences. You can find chrome kitchen faucets in almost any style and budget range. They look modern and usually easily match other chrome-plated fixtures you already have. On the other hand, stainless steel is very durable and requires less time to stay clean.
The stainless steel faucet highlights the bold style in modern kitchens, and its black spray hose has a unique appearance and has the greatest visual impact. The highly curved nozzle fits your body. Ningbo Afa Kitchen & Bath Co., Ltd. is a professional China manufacturer and supplier of stainless steel faucets . Welcome to purchase: https://www.afastainlesskb.com/product/stainless-steel-faucets/
--------------------
Kitchen Faucets Manufacturers -304 Stainless Steel Faucet: Reliable Quality
What should you pay attention to when choosing a faucet?
The first is to look at the style, first of all, make sure that the faucet matches the washbasin, sink, and bathtub.
The second is to look at the appearance, pay attention to the gloss of the surface, there should be no blistering, peeling, scratches and other defects, hand touch without burrs, no pores, no oxidation spots.
The third is the ceramic valve core, which affects the service life of the faucet.
304 stainless steel faucet, using high-quality food-grade stainless steel, safe lead-free, exquisite and pure texture and color, zero electroplating, pure hand-polished wire drawing process, beautiful texture and shiny. No corrosion and exudate, no odor or turbidity. High-quality ceramic valve core, stable performance, flexible handle control, no leakage after 500,000 switching tests, ensuring the durability of the faucet. High-quality stainless steel braided hose, with strong tensile force, has the characteristics of explosion-proof, water-proof, pressure-resistant and high-temperature resistant. Naturally won the praise of consumers.
Why choose a 304 stainless steel faucet?
1. Stainless steel faucet has high strength and more durable. 304 stainless steel has a tensile strength of 520 MPa or more. It does not deform during thermal expansion and contraction, and is not easy to burst or leak. The strength is much higher than plastic and common cast copper materials. Scientific experiments show that the life span of stainless steel faucets can reach hundreds of years and there is almost no maintenance during the life cycle. Compared with various types of faucets in the past, stainless steel faucets solve the trouble of frequent maintenance and replacement, and are more economical and environmentally friendly.
2. The material of stainless steel faucet does not contain lead. Nickel-based welding and seamless plugging process, the precipitation of heavy metals is far lower than the international standard (5 micrograms / liter), there is no corrosion and exudate, and no faucet will occur during use. The problem of odor and turbidity will not cause secondary pollution to drinking water, thereby ensuring the safety, health and purity of drinking water.
3. The stainless steel faucet does not need electroplating during the production process, the mirror surface is as bright as new, and the brushed surface is often new. In the process of surface polishing, it is only necessary to filter the dust generated by the polishing material, which causes less pollution to the environment. The brushed surface is easily cleaned and maintained with baking soda and white vinegar.
4, stainless steel smooth inner wall, no residual dirt, not easy to breed bacteria. The inner wall of the copper material is in contact with water and air for a long time, and patina is precipitated.
To sum up, stainless steel faucet is undoubtedly the choice of life faucet, and choosing a good quality and reliable stainless steel faucet is especially important.
Ningbo Afa Kitchen & Bath Co., Ltd. is a professional kitchen faucets manufacturers in China. The stainless steel faucet highlights the bold style in modern kitchens, and its black spray hose has a unique appearance and has the greatest visual impact. The highly curved nozzle fits your body. Welcome to buy: https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet
--------------------------------------------
Elaboration Of Process Quality Of Stainless Steel Sink
In the modern kitchen design, the function of the sink is significantly expanded. For example, a working area is opened where the sink and the cabinet meet, so that the sink has a storage function. Single tanks are often chosen by families with too little kitchen space, which can only meet basic cleaning functions; double tanks are widely used in homes, which can meet the needs of separate cleaning and conditioning, and also become a choice because they occupy space properly; Because the three-slot or mother-slot tanks are mostly shaped designs, they are more suitable for large kitchens with individual styles. They also have functions such as soaking or washing and storage. They can also separate raw and cooked food, saving time and effort. If the kitchen space is small, single or double sinks are more suitable; if you like to wash in a large space, a large single sink is a good choice. If the kitchen space is large, the range of options is relatively wide, such as three sinks or sinks with drainboards.
Smart stainless steel sinks are easier to clean and maintain. However, to prevent scratches, dents and aging, regular maintenance is also required. Use a dishwasher or soda to clean the stainless steel sink. Rinse thoroughly and polish the surface with a soft cloth or paper towel. Do not use scouring powder or wire for brushing the pot, they will scratch the sink. Use rubber or plastic pads to prevent tableware from scratching or leaving marks. You can also add a small amount of vinegar or ammonia to make the surface more shiny.
Stainless steel sink with short life
When choosing a smart stainless steel sink, first look at the thickness of the stainless steel material, and the thickness is preferably 0.8mm-1.0mm. Too thin will affect the life and strength of the sink, and too thick will easily damage the tableware.
Secondly, look at the surface treatment process. The high-gloss finish is high, but it is easy to scratch. The sanding is resistant to abrasion, but it is easy to collect dirt. The matte has both the high-gloss brightness and sanding durability. many.
Using stainless steel sink, the surface is easy to be scratched, so the surface is well treated by special treatments such as wire drawing and frosting, so that it can not only withstand repeated wear and tear, but also be more resistant to stains and easy to clean.
Ningbo Afa Kitchen & Bath Co., Ltd. is a professional Stainless Steel Handmade Sink Manufacturers in China. Stainless steel handmade sinks are made of stainless steel for maximum durability. All kitchen sinks are soundproofed and include thick rubber pads to reduce condensation and further reduce sound. Welcome to buy: https://www.afastainlesskb.com/product/sink/handmade-sink
--------------------------------------------
Kitchen Faucets Manufacturers -Faucets: Why Not Qualified?
At present, many daily necessities are cast from materials such as copper, iron, and stainless steel. These materials contain heavy metal elements. If they are not handled properly, they may cause excessive standards.
For example, the main elements of stainless steel include manganese, chromium, and nickel. To maintain corrosion resistance, stainless steel must contain a certain amount of chromium. If chromium is not handled properly, it may cause chromium to exceed standards. In the same way, improper handling of manganese may lead to excessive manganese.
The copper alloy used to make faucets contains trace elements such as iron, aluminum, and lead.
If there is no lead, it is difficult to mold during casting. The higher the lead content, the easier the casting process is. Therefore, copper faucets on the market generally contain a certain amount of lead. If the factory does not do well in the lead removal process during manufacturing, it will cause lead to exceed standards.
Another reason is that the technology and equipment of the company are aging, which leads to uncontrollable trace elements. Generally, when new equipment is put into production, its products are qualified, but when the equipment is used for a long time, the trace elements of the product will exceed the standard. This situation cannot be repaired from a technical perspective and can only be replaced by new equipment, but some factories continue to use it in order to save money. This is a technical issue and a cost issue.
A bathroom equipment vendor told reporters that most of the faucets on the market today are copper cores, but the quality is uneven. Small manufacturers' cheap faucets have a high possibility of exceeding lead levels. This is because some manufacturers, in order to control costs, do not buy standard brass alloys, but instead buy cheap lead brass from small workshops as raw materials. This lead brass tends to be high in lead, but it is only half the price of brass alloys.
How to distinguish inferior faucets from price
Some people in the industry told reporters that the price of a copper faucet that adopts a regular process should be more than one hundred yuan, while a faucet of tens of yuan is likely to use lead brass. "Compared to large-scale products, faucets of tens of yuan are really not worth the time and effort to choose one by one, let alone pay attention to the problem of excessive lead content." A Shanghai citizen who is renovating his home told reporters.
In this regard, some insiders said that domestic consumers do not pay enough attention to the quality and safety of faucets, which also gives many unqualified and inferior faucets an opportunity.
Simple form and popular pull-out stainless steel kitchen faucet, made of 100% solid stainless steel. Single lever operation. Single hole installation. Brushed stainless steel surface. Ningbo Afa Kitchen & Bath Co., Ltd. is a professional kitchen faucets manufacturers in China. Welcome to buy: https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/
----------------------------------------
Kitchen Faucet Manufacturers: Things To Watch Out For When Buying Faucets
- First, consider its quickness to use
After all, we touch the faucet every day. The inconvenience of using the faucet directly affects our understanding of the use, especially when you are in a bad mood or in the morning when you are in a hurry, and you encounter the inconvenience and tedious use of the faucet , That will be a more irritating and painful job! So in the use of functions and water control, the simpler and more efficient the design of the faucet structure, etc., it will give you a better understanding of the use, and when problems occur, Repairing will also be more convenient. You will not worry about repairing because of the broken parts, which may be broken, or even lose the whole set of faucets because of complexity and tediousness. Both lost and waste, so choose a simple and efficient faucet. It will bring a lot of quickness in life and the unity of the problem when it is later repaired. It becomes easier and easier to judge, and the loss is minimized.
2.The spool should be selected well
When choosing a faucet, pay attention to the inferior tumbling feeling on the left and right of the handle. Assuming that it is relatively simple and smooth, and the opening and closing is quick, it means that the quality of the valve core used in this type of faucet is relatively good and the sealing is good; the quality of the valve core is good It shows that heat resistance, low temperature resistance, wear resistance, and durability in use, so the valve core is very important for a faucet, which is equivalent to the heart of the faucet.
3.The surface quality of the faucet is better
On the surface of the faucet, we see bright light like a mirror surface. Generally, the surface of the faucet is polished and polished, and then treated with nickel-chromium plating. The advantage of this is to avoid oxidation problems on the brass surface and to improve the beauty of the product. When buying, pay attention to the quality of the plating of the faucet. The first thing to check is whether there is plating exposed bottom, plating blistering, plating scorching, plating fall, whether there are pores, and whether the color is uniform. Is the beautiful and practical faucet.
1.Choose a good foamer
Because a good bubbler will make water and air mix and foam to produce soft skin water, which can prevent splashing when using a faucet! Together it can effectively save water and filter impurities in the water. There are also certain Noise reduction! So it is important to choose a good bubbler at the end of the water!
2.Pay attention to the quality of each connection
For example, whether the matching joint receiving can be connected firmly, whether the joint receiving is cracked, whether there are burrs on the surface of the weaving layer, and whether there are burrs and hands. Are the threads on the joint receiving can be used for screwing, whether there is loosening or slipping after tightening The question is whether the connection is strong and the equipment is convenient at the time of the connection, so it is important to check the quality of these accessories and the quality of the equipment parts!
3.Pay attention to the convenience of faucet equipment
Because this will depend on the speed of disassembly and assembly when you buy your own equipment or repair it in the future. Together, it can improve the life of the faucet equipment. Broken, we must pay attention to this when buying!
Ningbo Afa Kitchen & Bath Co., Ltd. is a professional kitchen faucets manufacturers in China. The stainless steel faucet highlights the bold style in modern kitchens, and its black spray hose has a unique appearance and has the greatest visual impact. The highly curved nozzle fits your body. Welcome to purchase our stainless steel faucet products: https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet
-------------------------------------------
304 Stainless Steel Faucet: Lead-Free, Pollution-Free
Why must we use stainless steel for direct drinking faucets? Direct drinking water is a series of healthy living water that has undergone a series of purification treatments. In order not to cause secondary pollution to the direct drinking water source, the faucet that controls the water output must also be made of healthy materials. If copper or zinc alloy is used to make a direct drinking water faucet, when purified water passes through the pipe of the faucet, after contacting the copper or zinc alloy, it will be contaminated by the precipitated lead or other heavy metals again and become irrelevant health. 304 stainless steel, the world-recognized edible grade material, does not contain lead and pollution. Use it to make straight drinking faucets, which can ensure the safety of the water quality of the terminal water, and truly realize the quality and cleanliness.
Ningbo Afa Kitchen & Bath Co., Ltd. is one of the professional stainless steel faucet manufacturers in China. Welcome to purchase our stainless steel faucets products: https://www.afastainlesskb.com/product/stainless-steel-faucets
-----------------------------------------------------------
Kitchen Faucets Manufacturers Introduction-Faucet Production Process Knowledge
Copper ingots → dissolving → casting (low-grade sand casting, gravity casting of high-quality faucets) → cleaning after casting → inspection of castings → machine processing → tolerance inspection → test leakage → grinding → surface inspection → plating → plating inspection → assembly → Water test and leak test → finished product inspection → packaging → delivery.
Casting: Low-grade casting with cast sand, high-quality faucet casting with gravity, the relatively new technology is die-casting, one-time grinding molding is similar to the zinc alloy die-casting process.
Quality control: The quality in the production process before the finished product is controlled by the quality control, and the final product to the packaging are sampled by the quality assurance part, mainly to check the packaging and placement of the product.
Ningbo Afa Kitchen & Bath Co , Ltd. is a professional kitchen faucets manufacturers in China. Click our website for more information on different styles of high quality and reliable faucet products. For details, please visit: https://www.afastainlesskb.com/product/stainless-steel-faucets
------------------------------------------------------------
Stainless steel laundry cabinet-balcony laundry cabinet purchase tips
With the improvement of the quality of life, people ’s aesthetics have gradually improved. At the current stage of home improvement, many people will place a stainless steel laundry cabinet on the balcony of their home. So how do we choose a suitable balcony laundry cabinet? China stainless steel laundry cabinet manufacturer, supplier & Ningbo Afa Kitchen & Bath Co., Ltd. explained:
1.Security
It depends on whether the basin is waterproof, high temperature resistant, stain resistant, acid and alkali resistant, corrosion resistant and abrasion resistant, and cigarette burn resistant. The brand's laundry counter basin will meet at least the above points. The latter goes to the cabinet of the laundry cabinet. Waterproof, high temperature resistance, stain resistance, acid and alkali resistance, corrosion resistance, pressure resistance, sliding doors with balls, attached with non-drying lubricating ester, so it can be easily pushed and pulled, smooth and flexible, and has high load capacity, pressure resistance, wear resistance Does not deform. The pulley guide is the core technical part of the sliding door, so you must choose it carefully.
Chinese stainless steel laundry cabinet manufacturers and suppliers remind everyone: Because balcony laundry cabinets have been placed on the balcony for a long time in the sun, it is necessary to know whether the quality inspection report has high temperature resistance. Some materials are often exposed to sunlight and easily deformed.
Functionality
Can the height of the laundry cabinet meet the comfort of the human body? The storage space meets the needs of home use, and whether the washboard is treated does not hurt your hands.
3.Durability
Whether the thickness of the door panel of the laundry cabinet door is full and thick. 15mm or 18mm thick boards are used for sliding doors, and they are strong, stable, durable and pressure resistant; slightly worse ones will be 8mm or 14mm thick, which is relatively thin and frivolous. Whether the laundry counter surface is smooth and will not hurt your hands.
4.Professionalism
Is the balcony laundry cabinet professional and scientifically stylish? The popular balcony laundry cabinets are very scientific and reasonable in design. Often, according to the "comfortable use" principle, several different laundry cabinets have been developed, which can be freely matched and combined when customized. In addition, drawers and movable shelves can also be added and removed freely, showing their own style, showing their unique personality, winning the love of the DIY family. Perfect combination of irregular walls and laundry cabinets.
5, unity
Is the color of the cabinet door and the countertop consistent? The doors and countertops of the brand laundry cabinets come from the same professional laundry cabinet manufacturers. However, miscellaneous brand laundry cabinets are often patchy, and only plates and frames with similar colors can be found, which cannot be completely consistent.
6, aesthetics
Are the varieties and materials of the cabinet doors and countertops rich and varied? Different consumption concepts correspond to different color hobbies. At present, the materials that can be used for making cabinet doors in the market are artificial stone, oak, multilayer solid wood, stainless steel, space aluminum, and some other special materials. The tabletop colors include jade pull flower, jade blow flower, dark blow flower, golden flower white, microcrystalline, pearly white, dark brown, gold inlaid jade, light yellow, milky white and so on.
Environmental protection
Whether to choose green environmental protection materials. The artificial boards (fiberboard, particle board, plywood) used to make furniture nowadays, because formaldehyde adhesives are used in the production of boards, it is inevitable that formaldehyde is contained in the finished furniture. If the formaldehyde content of the cabinet material of the closet cabinet is too high, it will definitely have an adverse effect on the user's physical health.
Ningbo Afa Kitchen & Bath Co , Ltd. specializes in manufacturing and supplying high quality Stainless Steel Laundry Cabinet in China. Product details view: https://www.afastainlesskb.com/product/stainless-steel-cabinet/laundry-cabinet
------------------------------------------------------
Stainless Steel Faucets Maintenance Instructions
1. Do not wipe the surface of the faucet directly with a wet towel;
2. Do not wipe the faucet with burrs;
3． Don't let the faucet touch the acid and alkali liquid, you can spray neutral detergent on a soft cloth and then gently wipe the faucet;
4． Do not place the faucet directly on a hard object;
5. Wipe with a dry, soft cotton cloth.
Ningbo Afa Kitchen & Bath Co , Ltd. is a professional China manufacturer and supplier of stainless steel faucets . View stainless steel faucet product details: please visit: https://www.afastainlesskb.com/product/stainless-steel-faucets
-----------------------------------------------
Handmade Sink Manufacturers : Details For Buying A Stainless Steel Sink
1. Anti-noise treatment: The bottom of the high-quality kitchen stainless steel sink is sprayed or sticky rubber sheet and does not fall off, which can reduce the impact of tap water on the bottom of the basin and play a buffering role. Inside corner treatment: The inside corner of high-quality stainless steel sink is close to 90 degrees, and the vision in the sink is larger and the volume of the basin is larger.
2. Wholesale accessories for stainless steel sinks: High-quality sink heads require wall thickness, smooth handling, and never leak when the cage is closed. Touching beads are durable and feel comfortable. The sink pipe requires environmentally friendly disposable materials, which are easy to install, deodorant and resistant. Heat, aging resistance and other functions, very durable. Stainless steel sink forming process: The one-piece forming technology solves the leakage problem caused by the welding of the basin, which can not withstand the corrosion of various chemical liquids.
3. Before installing the water tank, you should first install the faucet and water pipe (water inlet pipe and drain pipe); because if you install the water tank first, it will cause unnecessary trouble when installing the water faucet and water pipe in the later stage, and it is easy to cause water leakage. In addition, the installation of the water pipe is two parts, namely the water inlet pipe and the drainage pipe.
4. Water inlet pipe: pay attention to whether the connection is firm and the location of hot and cold water is not wrong; drain pipe: pay attention to the leak tightness of the overflow hole, filter basket and tank, which directly determines the future experience of the sink, when they The higher the degree of sealing, the less prone to problems in the later stages of the use of the sink; the overflow hole is a protection hole to prevent the sink from overflowing outward. When installing the drain pipe of the overflow hole, pay attention to the tightness of the joint with the tank Make sure that the drain pipe of the overflow hole does not leak water; the same is true of the filter screen. Pay attention to the tightness of the joint between the drain pipe and the tank to ensure firmness and seal.
5. Manufacturers of manual sinks remind everyone to pay attention to the problem that the joints of water pipes are prone to problems. Most common leaks are due to insufficient sealing of the joints. Only after the sealing is done can the situation of water leakage in the later period be avoided and the service life of the water tank can be increased. Before the installation of the water tank, the installation position and size must be determined, so that we can order according to the size. Fortunately, there is a plan of the water tank, so as to avoid inaccurate data and lead to rework. In addition, after the water tank is firmly installed, do not shake it left or right, it is easy to leave a gap and cause loosening. Also, pay attention to the tightness of the gap in the joint.
For detailed stainless steel sink product details, please visit the handmade sink manufacturers - Ningbo Afa Kitchen & Bath Co , Ltd : https://www.afastainlesskb.com
--------------------------------------------------------
Stainless Steel Faucets : Installation On Different Occasions
There are many kinds of faucet materials. stainless steel faucets is one of them. In daily life, stainless steel faucets are indispensable, but stainless steel faucets need different installation methods in different occasions. How to install stainless steel faucets in different occasions? Ningbo AFA Kitchen and Bath Co ,Ltd . Online brief description:
Before installing the stainless steel faucet, be sure to remove the foreign matter in the water supply pipe, and then connect the stainless steel faucet inlet hose to prevent the clogging of the faucet by simple objects. The simple method can open the main gate valve of the domestic water pipe, and let the water flow make a simple flushing of the whole water pipe. Ensure that there are no impurities in the water pipe.
First, the thermostat:
Before installing the thermostatic faucet, please check if the water pipe is left hot and right cold. Remember not to connect the hot and cold water pipes incorrectly, so as to prevent the faucet from working properly; the working water pressure of the faucet is 0.05-1.0MPa, and the applicable water temperature is 4°C- 90 ° C, so be sure to ensure that the home water pressure is within the required range during installation, otherwise the faucet will not be able to supply water normally.
Second, shower, bathtub faucet (wall hanging):
When you have purchased a shower, bathtub, wall-mounted stainless steel faucet, you can choose the right height to bury the water pipe. The spacing between the hot and cold water pipes must be 15 cm; the main body of the faucet has been commissioned to the best condition, and it should not be disassembled by itself during the installation process, otherwise the sealing performance of the faucet during use will be very poor.
Concealed shower head: After purchasing a concealed faucet, the sump's spool is generally embedded in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be buried. The plastic protective cover of the valve plug should not be easily removed when it is buried, so as to prevent the cement and other chores from damaging the valve core when it is buried.
Third, single hole basin:
When you find that there is a distance between the angle valve and the water pipe on the faucet, purchase a special extension pipe to connect; in the installation process, you must connect the hot and cold water supply pipe according to the hot and cold water mark of the faucet, usually it is cold and hot left, so Be sure to pay attention during the installation process, you can not reverse the two. The 35 working points from the basin are most suitable. When installing, be sure to choose a special angle valve, and the angle valve must be fixed with the hot and cold water pipe of the wall outlet.
Fourth, single hole kitchen:
The kitchen faucet is used frequently and needs to be stable. The lock nut must be tightened.
After the faucet is installed, because the other decoration parts in the home are still going on, the country is just protecting the faucet, because it needs a simple cover, mainly to avoid the adhesion of other construction cement slurry, welding slag, etc. The faucet is spotted or discolored or blocked and cannot be used. https://www.afastainlesskb.com
© Copyright Ningbo AFA Kitchen and Bath Co ,Ltd